Knowledge Booster: AirBrake Edition (01 Apr 2026)
Welcome to today's AirBrake Knowledge Booster! We've handpicked 10 essential questions from our database to help you sharpen your skills. Dive in and test your knowledge!
Q1. निम्न में से किस अवस्था मे कंटीन्यूटी टेस्ट नहीं किया जाता है? In which of the following cases continuity test is not done?
- A) कोच को बाई पास करने पर
- B) अतिरिक्त लोको लगाने पर
- C) अतिरिक्त कोच/वेगन लगाने पर
- D) ACP को आइसोलेट करने पर
Correct Answer: ACP को आइसोलेट करने पर
Explanation: ACP को आइसोलेट करने पर
Q2. एयर ब्रेक गाड़ी मे 5 मिनिट मे BP प्रेशर कितना लीकेज अनुमत है? How much leakage of BP pressure is allowed in 5 minutes in an air brake vehicle?
- A) 0.5 Kg/cm²
- B) 0.7 Kg/cm²
- C) 1.5 से 2.5 Kg/cm²
- D) 1.25 Kg/cm²
Correct Answer: 1.25 Kg/cm²
Explanation: 1.25 Kg/cm²
Q3. BVG एंड का BP कट ऑफ एंगल कोक बंद करने पर वेंट होल से किस ओर का BP प्रेशर ड्रॉप होगा? BP cut off angle of BVG end When the coke is closed, which side of the vent hole will the BP pressure drop?
- A) लोको की ओर का
- B) BVG की ओर का
- C) पूरी गाड़ी का
- D) कोई भी नहीं
Correct Answer: BVG की ओर का
Explanation: BVG की ओर का
Q4. मालगाड़ी मे पूरा ब्रेक लगाने के बाद रिलीजिग समय लगभग कितना होता है? What is the approximate releasing time after full braking of a goods train?
- A) 40 सेकंड
- B) 90 सेकंड
- C) 3 मिनिट
- D) 1 मिनिट
Correct Answer: 3 मिनिट
Explanation: 3 मिनिट
Q5. प्रारंभिक स्टेशन पर गाड़ी मे BP प्रेशर नहीं बन रहा है तो कौन सा टेस्ट करेंगे? If BP pressure is not being generated in the vehicle at the starting station, then which test will be done?
- A) कम्प्रेशर की ताकत
- B) लोको मे BP लीकेज टेस्ट
- C) गाड़ी मे BP लीकेज टेस्ट
- D) उपरोक्त्त सभी
Correct Answer: उपरोक्त्त सभी
Explanation: उपरोक्त्त सभी
Q6. एयर ब्रेक ट्विन पाइप सिस्टम मे प्रारंभिक चर्जिग समय कितना होता है? What is the initial charging time in air brake twin pipe system?
- A) 10 से 12 मिनिट
- B) 15 से 20 मिनिट
- C) 20 से 25 मिनिट
- D) 25 से 30 मिनिट
Correct Answer: 10 से 12 मिनिट
Explanation: 10 से 12 मिनिट
Q7. मालगाड़ी के ब्रेक सिलेन्डर मे अधिकतम कितना प्रेशर जाता है? What is the maximum pressure in the brake cylinder of a goods train?
- A) 5.0 Kg/cm²
- B) 1.8 Kg/cm²
- C) 3.0 Kg/cm²
- D) 3.8 Kg/cm²
Correct Answer: 3.8 Kg/cm²
Explanation: 3.8 Kg/cm²
Q8. मालगाड़ी में काम करते समय यदि लोको के DV का चेंज ओवर कोक "P" पोजीशन पर होगा तो क्या होगा? What will happen if the change over coke of DV of loco is at "P" position while working in goods train?
- A) गाड़ी मे ब्रेक जल्दी लगेंगे
- B) लोको मे व्हील स्किड होंगे
- C) वेगन मे व्हील स्किड होंगे
- D) लोको के BC मे प्रेशर अधिक जायेगा
Correct Answer: लोको मे व्हील स्किड होंगे
Explanation: लोको मे व्हील स्किड होंगे
Q9. यात्री गाड़ी मे फीड पाइप का क्या काम है? What is the function of the feed pipe in a passenger train?
- A) जल्दी ब्रेक लगाना
- B) जल्दी ब्रेक रिलीज करना
- C) ब्रेक पावर बढ़ाना
- D) उपरोक्त्त सभी
Correct Answer: जल्दी ब्रेक रिलीज करना
Explanation: जल्दी ब्रेक रिलीज करना
Q10. यात्री गाड़ी मे फीड पाइप का क्या काम है? What is the function of the feed pipe in a passenger train?
- A) जल्दी ब्रेक लगाना
- B) जल्दी ब्रेक रिलीज करना
- C) ब्रेक पावर बढ़ाना
- D) उपरोक्त्त सभी
Correct Answer: जल्दी ब्रेक रिलीज करना
Explanation: जल्दी ब्रेक रिलीज करना
0
0
Best portal for railway departmental exam
mycbt.in - join free
Comments 0
Post CommentNo comments yet. Be the first to comment!