Knowledge Booster: BWM Edition (23 Apr 2026)
Welcome to today's BWM Knowledge Booster! We've handpicked 10 essential questions from our database to help you sharpen your skills. Dive in and test your knowledge!
Q1. VHF sets as a means of communication should be permitted only in the presence ofsupervisory staff for prolonged duration of संचार के साधन के रूप में वीएचएफ सेट का उपयोग केवल पर्यवेक्षी कर्मचारियों की उपस्थिति में ही लंबे समय तक करने की अनुमति दी जानी चाहिए।
- A) 1 hour or more
- B) 3 hours or more
- C) 6 hours or more
- D) 12 hours or more
Correct Answer: 3 hours or more
Explanation: BWM
Q2. In push button token less block instrument, the button is to be operated for cancellation of lineclear along with BCB पुश बटन टोकन रहित ब्लॉक उपकरण में, बीसीबी के साथ लाइन क्लियर को रद्द करने के लिए बटन को संचालित किया जाना चाहिए।
- A) TGT Button
- B) .TCF Button
- C) .Cancellation Button
- D) .Panel Lamp
Correct Answer: .Cancellation Button
Explanation: BWM
Q3. In Automatic block system, available alternate means of communications are स्वचालित ब्लॉक प्रणाली में, संचार के उपलब्ध वैकल्पिक साधन निम्नलिखित हैं:
- A) . BSNL / Railway. Auto Phones
- B) . Control Phones
- C) . station to station telephone
- D) . All the above
Correct Answer: . All the above
Explanation: BWM
Q4. Message for token balancing shall be given when the token balance falls to टोकन बैलेंस कम होने पर टोकन बैलेंसिंग के लिए संदेश दिया जाएगा।
- A) 0.5
- B) 0.6
- C) 0.1
- D) .No Limit
Correct Answer: 0.6
Explanation: BWM
Q5. On double line, block instrument will be operated for obtaining/granting line clear by डबल लाइन पर, लाइन क्लियर प्राप्त करने/प्रदान करने के लिए ब्लॉक इंस्ट्रूमेंट का संचालन किया जाएगा।
- A) .S M in Rear
- B) .S M in Advance
- C) .Both In Co- Operation
- D) . Any Body
Correct Answer: .S M in Advance
Explanation: BWM
Q6. Slip/Catch siding key cannot be removed when Block instrument is in this position जब ब्लॉक इंस्ट्रूमेंट इस स्थिति में हो तो स्लिप/कैच साइडिंग कुंजी को हटाया नहीं जा सकता।
- A) .TCF
- B) .TGT
- C) .TCF / TGT
- D) .Line Closed
Correct Answer: .Line Closed
Explanation: BWM
Q7. While issuing PLCT, Loco Pilot ?s signature is to be obtained in पीएलसीटी जारी करते समय, लोको पायलट के हस्ताक्षर प्राप्त किए जाने चाहिए।
- A) column A of T / A 1425
- B) column A of T / B 1425
- C) . column B of T/A 1425
- D) column B of T / B 1425
Correct Answer: column A of T / A 1425
Explanation: BWM
Q8. Before dispatching a train using the Block telephone, Both SMs shall cross check PrivateNumbers given for Line Clear, for the last 3 preceding train(s) and record these particulars in the ब्लॉक टेलीफोन का उपयोग करके ट्रेन रवाना करने से पहले, दोनों एसएम को लाइन क्लियर के लिए दिए गए पिछले 3 ट्रेनों के प्राइवेट नंबरों की क्रॉस-चेक करनी चाहिए और इन विवरणों को रिकॉर्ड करना चाहिए।
- A) Station Diary
- B) PN exchange register
- C) TSR
- D) none of these
Correct Answer: TSR
Explanation: BWM
Q9. When SM does not want to grant line clear, he shall give following bell code signal जब एसएम लाइन क्लियर करने की अनुमति नहीं देना चाहता, तो वह निम्नलिखित बेल कोड सिग्नल देगा।
- A) 0
- B) 0
- C) .000000 - 0
- D) 0
Correct Answer: 0
Explanation: BWM
Q10. In push button token less block instrument when shunt key cannot be extracted for shuntingpurposes, the SM shall advise the SM at the other end पुश बटन टोकन रहित ब्लॉक उपकरण में, जब शंटिंग के लिए शंट कुंजी नहीं निकाली जा सकती है, तो एसएम दूसरे छोर पर स्थित एसएम को सूचित करेगा।
- A) to keep block instrument in line closed position
- B) to extract shunt key
- C) to keep block instrument in TCF position
- D) none of these
Correct Answer: to extract shunt key
Explanation: BWM
0
0
Best portal for railway departmental exam
mycbt.in - join free
Comments 0
Post CommentNo comments yet. Be the first to comment!