Knowledge Booster: operations Edition (25 Apr 2026)
Welcome to today's operations Knowledge Booster! We've handpicked 10 essential questions from our database to help you sharpen your skills. Dive in and test your knowledge!
Q1. The speed during shunting operations shall not exceed शंटिंग संचालन के दौरान गति इससे अधिक नहीं होनी चाहिए
- A) 8 Kmph
- B) 15 Kmph
- C) 10 Kmph
- D) 20 Kmph
Correct Answer: 15 Kmph
Explanation: 15 Kmph
Q2. The full form of OTL of BV equipment is... lock बीवी उपकरण के ओटीएल का पूरा नाम... लॉक है।
- A) One time
- B) Other tool
- C) Office tools
- D) None of the above
Correct Answer: One time
Explanation: One time
Q3. Speed of class “B” ODC on BG shall not exceed ________ kmph. बी जी पर क्लास “बी” ओडीसी की गति ________ किमी प्रति घंटे से अधिक नहीं होनी चाहिए।
- A) 40
- B) 25
- C) 15
- D) None of the above
Correct Answer: 40
Explanation: 40
Q4. When class “C” ODC is attached by a train ______, _______ and ________ shall proceed as an escort. जब किसी ट्रेन द्वारा क्लास “सी” ओडीसी को जोड़ा जाता है, तो _______, _______ और ________ एस्कॉर्ट के रूप में आगे बढ़ेंगे।
- A) SLI, TI, SI
- B) TXR, TI, PWI
- C) PA, LI, Steno
- D) None
Correct Answer: TXR, TI, PWI
Explanation: TXR, TI, PWI
Q5. Whenever LPs/ALPs/SMs/Guards/Switchmen join this Zonal Railway, on transfer, they shall attend जब भी एलपी/एएलपी/एसएम/गार्ड/स्विचमैन इस जोनल रेलवे में स्थानांतरण पर शामिल होते हैं, तो उन्हें उपस्थित होना होगा।
- A) Refresher Course
- B) Promotional Course
- C) Initial Course
- D) No Training Required
Correct Answer: Refresher Course
Explanation: Refresher Course
Q6. “Danger zone” means the zone lying within _____ meters of any live equipment. “खतरनाक क्षेत्र” से तात्पर्य किसी भी चालू उपकरण से _____ मीटर के दायरे में स्थित क्षेत्र से है।
- A) 2
- B) 2.5
- C) 1.5
- D) 3
Correct Answer: 2
Explanation: 2
Q7. Calling ON signal is to be used only on two occasions, they are कॉलिंग ऑन सिग्नल का उपयोग केवल दो अवसरों पर किया जाना है, वे हैं
- A) Signal is defective, Line is occupied
- B) Point failure, interlocking working
- C) Derailments, accidents
- D) None of the above
Correct Answer: Signal is defective, Line is occupied
Explanation: Signal is defective, Line is occupied
Q8. Guard shall set his watch by the station clock or the clock at the authorized place of reporting for duty and communicate the time to the LP and make entry in the... गार्ड को स्टेशन की घड़ी या ड्यूटी पर रिपोर्ट करने के अधिकृत स्थान की घड़ी के अनुसार अपनी घड़ी सेट करनी होगी और समय की सूचना एलपी को देनी होगी तथा उसे रिकॉर्ड में दर्ज करना होगा।
- A) CTR
- B) LP rough journal
- C) VG
- D) All above
Correct Answer: CTR
Explanation: CTR
Q9. When engine pushing a train and guard is travelling in brake van, which is leading, the speed shall not exceed _____ kmph, when not leading. जब कोई इंजन ट्रेन को धकेल रहा हो और गार्ड ब्रेक वैन में यात्रा कर रहा हो, जो आगे चल रही हो, तो गति _____ किमी प्रति घंटे से अधिक नहीं होनी चाहिए, जब वह आगे नहीं चल रही हो।
- A) 15__8
- B) 25__8
- C) 40__25
- D) None
Correct Answer: 40__25
Explanation: When engine pushing a train and guard is travelling in brake van, which is leading, the speed shall not exceed 40 kmph; when not leading, 25 kmph. Rule Reference Per Indian Railways GR 4.12: Guard in leading brake van: Max 40 kmph (visibility ensured). Guard not leading (van at rear): Max 25 kmph outside station limits.
Q10. Shunt signal is of _______ types, and they are _______ and _______ शंट सिग्नल _______ प्रकार के होते हैं, और वे _______ और _______ हैं।
- A) 2, Colour Light, semaphore
- B) 3, Miniature Arm, Disk, Position
- C) 1, Colour light
- D) None of the above
Correct Answer: 3, Miniature Arm, Disk, Position
Explanation: 3, Miniature Arm, Disk, Position
0
0
Best portal for railway departmental exam
mycbt.in - join free
Comments 0
Post CommentNo comments yet. Be the first to comment!