Knowledge Booster: AirBrake Edition (06 May 2026)
Welcome to today's AirBrake Knowledge Booster! We've handpicked 10 essential questions from our database to help you sharpen your skills. Dive in and test your knowledge!
Q1. ब्रेक बाइंडिग होने पर कोच / वेगन को कब आइसोलेट करेंगे? When will you isolate the coach/wagon in case of brake binding?
- A) पहली बार
- B) दूसरी बार
- C) तीसरी बार
- D) कभी नहीं
Correct Answer: पहली बार
Explanation: पहली बार
Q2. प्रारंभिक स्टेशन पर गाड़ी मे BP प्रेशर नहीं बन रहा है तो कौन सा टेस्ट करेंगे? If BP pressure is not being generated in the vehicle at the starting station, then which test will be done?
- A) कम्प्रेशर की ताकत
- B) लोको मे BP लीकेज टेस्ट
- C) गाड़ी मे BP लीकेज टेस्ट
- D) उपरोक्त्त सभी
Correct Answer: उपरोक्त्त सभी
Explanation: उपरोक्त्त सभी
Q3. Ordinary rules may be amended by the Ordinary rules may be amended by the
- A) Railway Board
- B) Railway Safety Commissioner
- C) Print
- D) Indian Government
Correct Answer: Railway Board
Explanation: Railway Board
Q4. कितना MR प्रेशर होने के बाद डुप्लेक्स वाल्व प्रेशर को FP मे जाने देता है? After what MR pressure does the duplex valve allow pressure to pass into the FP?
- A) 5.0 Kg/cm²
- B) 4.5 Kg/cm²
- C) 6.0 Kg/cm²
- D) 8.0 Kg/cm²
Correct Answer: 5.0 Kg/cm²
Explanation: 5.0 Kg/cm²
Q5. WAG-5 लोको मे A-9 को इमरजेंसी पोजीशन पर रखने पर क्या होगा? What will happen if A-9 is kept in emergency position in WAG-5 loco?
- A) फ्लेशर लाइट जलेगी
- B) LED प्रकाशित होगी
- C) ऑटो रिग्रेशन आयेगा
- D) उपरोक्त्त सभी
Correct Answer: ऑटो रिग्रेशन आयेगा
Explanation: ऑटो रिग्रेशन आयेगा
Q6. कम्प्रेसर की ताकत जाँचते समय BPSW दबाने पर 1 मिनिट मे कितना BP प्रेशर ड्रॉप अनुमत है? What is the BP pressure drop allowed in 1 minute when BPSW is pressed while checking the power of the compressor?
- A) 1.0 Kg/cm²
- B) 0.6 Kg/cm²
- C) 1.5 से 2.5 Kg/cm²
- D) 1.25 Kg/cm²
Correct Answer: 0.6 Kg/cm²
Explanation: 0.6 Kg/cm²
Q7. यात्री गाड़ी मे ACP होने पर लोको पर क्या संकेत मिलेंगे? What signals will be given on the loco when there is ACP in a passenger train?
- A) फ्लेशर लाइट जलेगी
- B) LED प्रकाशित होगी
- C) ऑटो रिग्रेशन आयेगा
- D) उपरोक्त्त सभी
Correct Answer: उपरोक्त्त सभी
Explanation: उपरोक्त्त सभी
Q8. एयर ब्रेक सिंगल पाइप सिस्टम मे प्रारंभिक चार्जिग समय कितना होता है? What is the initial charging time in air brake single pipe system?
- A) 10 से 12 मिनिट
- B) 15 से 20 मिनिट
- C) 20 से 25 मिनिट
- D) 25 से 30 मिनिट
Correct Answer: 20 से 25 मिनिट
Explanation: 20 से 25 मिनिट
Q9. मालगाड़ी के ब्रेक सिलेन्डर मे अधिकतम कितना प्रेशर जाता है? What is the maximum pressure in the brake cylinder of a goods train?
- A) 5.0 Kg/cm²
- B) 1.8 Kg/cm²
- C) 3.0 Kg/cm²
- D) 3.8 Kg/cm²
Correct Answer: 3.8 Kg/cm²
Explanation: 3.8 Kg/cm²
Q10. गाड़ी का FP पाइप लोको के BP पाइप से जुड़ जाये तो A-9 से ब्रेक लगाने पर क्या होगा? If the FP pipe of the train is connected to the BP pipe of the loco, what will happen when the brakes are applied from A-9?
- A) गाड़ी मे ब्रेक नहीं लगेगी
- B) पूरी गाड़ी मे ब्रेक लगेगी
- C) केवल लोको में ब्रेक लगेगी
- D) उपरोक्त्त A एवं C दोनों
Correct Answer: उपरोक्त्त A एवं C दोनों
Explanation: उपरोक्त्त A एवं C दोनों
0
0
Best portal for railway departmental exam
mycbt.in - join free
Comments 0
Post CommentNo comments yet. Be the first to comment!