Knowledge Booster: S_T_Signal Edition (20 Aug 2026)
Welcome to today's S_T_Signal Knowledge Booster! We've handpicked 10 essential questions from our database to help you sharpen your skills. Dive in and test your knowledge!
Q1. What should be Tolerable Hazard Rate (THR) in terms of Hazards per Hr, for Safety Integrity Level 4 (SIL 4) enabled systems? सेफ्टी इंटीग्रिटी लेवल 4 (SIL 4) सक्षम प्रणालियों के लिए, प्रति घंटे खतरों के संदर्भ में सहनीय जोखिम दर (THR) क्या होनी चाहिए?
- A) 10/-6 to 10/ -5
- B) 10/ -7 to 10/ -6
- C) 10/ -8 to 10/ -7
- D) 10/ -9 to 10/ -8
Correct Answer: 10/ -9 to 10/ -8
Explanation: Explanation : 10 . SIL ratings correlate to the frequency and severity of hazards.
Q2. What is the process of shaping of metal by squeezing them in between two or more dies in order to obtain desired shape called? वांछित आकार प्राप्त करने के लिए दो या दो से अधिक डाई के बीच में धातु को निचोड़कर आकार देने की प्रक्रिया क्या कहलाती है?
- A) Forming
- B) Welding
- C) Grinding
- D) Forging
Correct Answer: Forging
Explanation: Explanation :
Q3. Under which ministry commission of railway safety (CRS)functions? रेलवे सुरक्षा आयोग (सीआरएस) किस मंत्रालय के अंतर्गत कार्य करता है?
- A) Ministry of railways
- B) Home ministry
- C) Ministry of civil aviation
- D) The ministry of road transport and highways
Correct Answer: Ministry of civil aviation
Explanation: Explanation : रेलवे सुरक्षा आयोग (सीआरएस) भारत सरकार में नागरिक उड्डयन मंत्रालय के प्रशासनिक नियंत्रण के तहत काम करता है। सीआरएस भारत में रेल यात्रा और ट्रेन संचालन की सुरक्षा के लिए जिम्मेदार है
Q4. Input of SMR is एसएमआर का इनपुट है
- A) 110v AC
- B) 110v DC
- C) 230VAC
- D) 230v DC
Correct Answer: 230VAC
Explanation: Explanation : i/p230v AC to o/p110v DC
Q5. Station kavach communicates with NMS through the following interface? स्टेशन कवच निम्नलिखित इंटरफ़ेस के माध्यम से एनएमएस के साथ संचार करता है?
- A) E1
- B) GPRS
- C) serial
- D) Radio
Correct Answer: E1
Explanation: Explanation : ( , offline simulation and
Q6. Auto/Manual change over switch in IPS shall normally be placed in_ Position आईपीएस में ऑटो/मैनुअल चेंज ओवर स्विच को सामान्यतः _ स्थिति में रखा जाना चाहिए।
- A) Inverter 1
- B) Inverter 2
- C) CVT
- D) None
Correct Answer: None
Explanation: Explanation : auto mode.
Q7. RTUs are used in ____________. CBT ASTE 70% 2025. आरटीयू का उपयोग ____________ में किया जाता है।
- A) Level crossing gates
- B) IBS
- C) Auto huts
- D) All the options
Correct Answer: All the options
Explanation: Explanation : RTUs are employed in Indian Railways signaling systems for remote monitoring and control. Their usage includes:
Q8. The load current at a station is 13 Amps and 200 AH batteries are used for backup. What shall be the minimum capacity of the charger. िकसी स्टशन पर लोड करट 13 एम्पयर ह तथा बकअप क िलए 200 AH बटरी का उपयोग िकया जाता ह। चाजर की न्यनतम क्षमता िकतनी होगी?
- A) 13 Amps 13 ए म्पयर
- B) 20 Amps 20 ए म्पयर
- C) 33 Amps 33 ए म्पयर
- D) 25 Amps 25 ए म्पयर
Correct Answer: 33 Amps 33 ए म्पयर
Explanation: Explanation : Minimum Charger Capacity =Load Current + Battery Charging Current Load Current = 13 Amps
Q9. Tachometer is used to measure _____________. ASTE 70% 2025 टैकोमीटर का उपयोग ____________ मापने के लिए किया जाता है। ASTE 70% 2025
- A) Specific gravity of water
- B) Wind velocity
- C) Distance between spokes of a wheel
- D) Speed of the moving wheel
Correct Answer: Speed of the moving wheel
Explanation: Explanation :
Q10. The minimum insulation resistance of a signalling cable shall be _________. CBT ASTE 70% 2025. सिग्नलिंग केबल का न्यूनतम इन्सुलेशन प्रतिरोध _________ होना चाहिए। CBT ASTE 70% 2025.
- A) 5 mega ohms/km
- B) 10 mega ohms/km
- C) 100 mega ohms/km
- D) 1 mega ohm/km
Correct Answer: 5 mega ohms/km
Explanation: Explanation : must not be less than 5 mega ohms per km 500 V insulation tester
Best portal for railway departmental exam
mycbt.in - join free
Comments 0
Post CommentNo comments yet. Be the first to comment!